Reply to thread

Message: <blockquote data-quote="glamont" data-source="post: 85162" data-attributes="member: 12042"><p>I believe I fixed this issue. I took the panel off and found a lose black wire attached with lose electrical tape on the back of the parking brake switch. I removed the electrical tape, removed some of the plastic covering from the wire and reattached it. Haven't had a problem since. On a side note, the fuel indicator was working after I put everything back together, but a few hours later I noticed that it stopped working; It went from indicating 1/4 tank to empty. No fuel leaks found and the skid steer still operated.</p></blockquote><p></p>