Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 93798" data-attributes="member: 82">I still don't advise removing it, but you are going to do it anyway and you have your reasons.Removing the bar is easy, two bolts, i assume you are talking about removing and then making it so the machine still works. You will need the magnet from the pivot point and the sensor.Pu tthe two together and rotate the magnet around till the panel lights up to say it's unlocked. You will need to cable tie and tape the two together so it doesn't move or else you will be driving then the brake will come on.</blockquote>