Reply to thread

Message: <blockquote data-quote="thetool" data-source="post: 21004" data-attributes="member: 1534">That's interesting.....I would try disconnecting the battery negative terminal, wait a couple minutes, reconnect and see if that cleared it.If that dosen't work, you may need to get your controller re-programmed.  They should try to scrub the controller as much as they can, by unplugging it right after "clearing memory".  They'll know what that means, and it's ammo for you to ask in the event they tell you you need a new controller.  If they're decent, they should be happy to do this right on your trailer in their yard.  Buy them donuts....=).Now you know, though, that you can't really just tap into anything up under the dash.  Anytime you have a controller involved it can lead to problems like these.Any 12v taps in the harness(there are a few) will have a black-plastic shrouded spade connector, and will be either red for live or orange for keyed power, and the wire will be single.Good Luck.</blockquote>