Reply to thread

Message: <blockquote data-quote="farmboy555" data-source="post: 49391" data-attributes="member: 491"><p>I use to do it for a living up to 15 story buildings. I used a Cat 977L Highlift. The main thing we tried to do was a little at a time and run and turn your machine on the wood to grind it up. More on a truck, less loads. With the 853 your going to have to keep your work in frount of the machine if you have reg tires on it. Just take your time start tearing out 1 corner and take it as it comes. The FIRST THING YOU DO IS GET ON THE ROOF AND PUSH/TEAR THE CHIMNEY OFF so it stays off you.</p></blockquote><p></p>