Deere ct332 hyd port lock

Help Support SkidSteer Forum:

gclark

New member
Joined
Jan 11, 2023
Messages
1
Matt
Not sure if you were asking a question or if it is resolved by now. I replaced that solenoid on one of our 2006 CT322s a couple years ago. It's the odd one in the hyd control block in the foot pedal area. Boom lock and bucket lock solenoids are the same but the port lock is a little different. Our machine is an early production SN and has foot controls. The part for it was KV23085. Good ohm reading on port lock solenoid terminals is 8.2 - 9.0 ohms. FYI the boom and bucket solenoids should be 14.0 - 18.5 ohms. I did not check for aftermarket availability and thus paid a very high price from the Deere dealer. Hope this helps you or someone in the future. By the way, symptom in our case was machine would start and run but foot controls for boom and bucket would not unlock. I don't recall if machine was drivable or not with the bad port lock solenoid.
 
Top