Reply to thread

Message: <blockquote data-quote="rickiewilliams" data-source="post: 83196" data-attributes="member: 11456"><p>The the person that sent me the link in the email "this is your solenoid" all that loads is a blank JD parts page. I don't know where this piece is located on the engine. Also, I have read that one of the fitting might have a check valve in it. If so, how do I find it? In the tech manual that came with the machine, NOTHING is stated about glow plugs except for replacing the fuse. With 3800 hours on this machine, if it even might help with its starting, I want to replace them. But I am going to need help with the procedure, their location, part number, etc. Also, the troubling thing about the manual is that it was obviously written by folks working on a machine that was NOT in need of repair. Here's an example: "To raise the operator's station, start and move the machine to level ground and raise the boom arms and engage the lock" What if the machine will not start and run?</p></blockquote><p></p>