would you have parts and operators manualsI have them if you're still looking
I just purchased a deawoo 1760xl with a poped engine does anyone know how i unlock the wheel drive motors so I can load it?I have them if you're still looking
Yes im looking for information!I just purchased a deawoo 1760xl with a poped engine does anyone know how i unlock the wheel drive motors so I can load it?
I am not familiar with that machine, at all, but here are some things to try.Yes im looking for information!
Yes thank you for your input however yes we tried engaging the controls no luck we also looked into pulling the hoses off the pump if it was in an ideal situation it probably would be an option however in its current state it's kinda like a last resort! Thanks again n god blessI am not familiar with that machine, at all, but here are some things to try.
Some older machines you can push the control arms in the direction you want to tow the machine. This will open the drive motor valve and allow the machine to roll.
Remove the hoses from the drive motors. Cap the hoses but not the motors. This will allow the motors to turn. However, be sure to clean the motors and everything around them before doing this. You do not want to get dirt in the motors.
There is no bypass on the pump. Can you upload a photo of the motor? I may be able to tell if it has a bypass if I know what motor it is.Yes thank you for your input however yes we tried engaging the controls no luck we also looked into pulling the hoses off the pump if it was in an ideal situation it probably would be an option however in its current state it's kinda like a last resort! Thanks again n god bless
There is no bypass on the pump. Can you upload a photo of the motor? I may be able to tell if it has a bypass if I know what motor it is. Im sorry we did not take any pictures of the motors ! I will see if i can get the fella to send me some pictures god bless