So I have a 2006 Deere CT322 giving codes F99P8 and F9D5. Was using it the other day and if I shut if off, it would not restart for a few minutes. This weekend I was using it and I shut it down to disconnect the Aux hydraulics to remove the grapple bucket. When I went to restart it, the starter would not crank. I looked and saw the codes F9D5 and F9P8. When I turn the key on, I hear a click over my right shoulder and then when I turn it to start I just get a click on the starter (I believe the starter). Battery voltage shows 12.5 volts. I will check the fuses tonight. I will also raise the cab and try to find/check the parking break solenoid. Is the starter solenoid not pulling in to start or is the codes holding out the starter to prevent starting? Diagnostics reports back what I believe is everything is testing good. Any help would be appreciated. Thank you in advance.