Reply to thread

Message: <blockquote data-quote="foton" data-source="post: 123202" data-attributes="member: 16041"><p>I think it is possible that one cylinder could go bad ( internally bypass) that much to make the other on not be able to operate but unlikely. I believe that they are teed together if you can remove the hoses from one cylinder and cap the hoses then try to operate bucket. If it moves then you found the bad cylinder , if not reconnect and move to the other cylinder, and see what happens , be careful as the controls might be faster with only one cylinder in the circuit.</p></blockquote><p></p>