Reply to thread

Message: <blockquote data-quote="Mike10" data-source="post: 45947" data-attributes="member: 5461"><p>There are two brackets holding the tank in place.  The rear one is right below the filler spout and is held in place with two bolts.  The other bracket is at the front of the tank.  Flip the seat up and you should be able to see it.  If you can pump the fuel out of the tank.  remove the filler spout and hoses going into the tank.  remove the sender wires.  To get the tank out the rear of the tank needs to go down.  You might see if you can access the bolts by just lowering the rear of the tank slightly.  If not  then you will need to raise the back of the loader high so the tank can be lowered enough to remove.</p></blockquote><p></p>