Reply to thread

Message: <blockquote data-quote="waggles" data-source="post: 53852" data-attributes="member: 3105"><p>That's why they made the newer S130 lift arms bigger and wider. A friends has a 753H thats been repaired at the top pivot points and down on the center tilt ram as you describe, these machines have lots of power so it flexes quite a bit then metal fatigue sets in. When you weld it back up you will need to add plating around the pivot points to spread the load and add gussets to the centre brace to increase torsional rigidity. It can be done just takes time and money.</p></blockquote><p></p>