Reply to thread

Message: <blockquote data-quote="coreya3212" data-source="post: 37818" data-attributes="member: 2406"><p>I have a feeling you are looking at pictures other than mine.  What gallery were you looking in and I will see if thats the same as mine.  The pictures I uploaed were black and white out of the manual so you wouldnt have seen colors of the seals.  This leak does not have anything to do with the spools, or bores or too many seals etc.  It is definately coming between sections.  I have narrrowed it down to one of the valves.  the leak always occurs in the same spot, between the inlet and first valve section.  I reversed the 1st and 3rd valve, as they are the same, and the leak moves to between the middle and 3rd section, so I know it is that piece causing the problem.  I just cant see why. No defect evident.  What are thoguhts on lapping that face a bit?  Should this be attempted?  Thanks Fish and Tazz.  I am getting close to starting a fire...</p></blockquote><p></p>