Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Other Brand Skidsteer Forums
Case Skidsteer Forum
cold start procedure for 1998 case 1840 uni-loader
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="foton" data-source="post: 121522" data-attributes="member: 16041"><p>I do not know exactly but if it has a intake manf. heater it will have a small fuel line going to the intake manf. and a electrical hook up too. I have a perkins 4.2 liter set up like that , a center position on the key switch turns on the heater they say about 10 seconds is all you need to get it to get the diesel to light, but mine has never worked right. I added a freeze plug type heater and a battery blanket, but I got power. I guess you could use a generator to run the heaters and start it 1 hour before you need the machine. what a pain that would be. good luck, oh if you have the diesel manifold heater it is possible that the electric ingition post in the manifold itself is bad . You can take them out and put 12 volts to them and see if it gets hot in a hurry, it should.</p></blockquote><p></p>
[QUOTE="foton, post: 121522, member: 16041"] I do not know exactly but if it has a intake manf. heater it will have a small fuel line going to the intake manf. and a electrical hook up too. I have a perkins 4.2 liter set up like that , a center position on the key switch turns on the heater they say about 10 seconds is all you need to get it to get the diesel to light, but mine has never worked right. I added a freeze plug type heater and a battery blanket, but I got power. I guess you could use a generator to run the heaters and start it 1 hour before you need the machine. what a pain that would be. good luck, oh if you have the diesel manifold heater it is possible that the electric ingition post in the manifold itself is bad . You can take them out and put 12 volts to them and see if it gets hot in a hurry, it should. [/QUOTE]
Verification
Post reply
Forums
Other Brand Skidsteer Forums
Case Skidsteer Forum
cold start procedure for 1998 case 1840 uni-loader
Top