Cat 247b not starting

Help Support SkidSteer Forum:

Musaexcavating

New member
Joined
May 10, 2014
Messages
1
Ok here's my dilemma my machine won't start by the key but when I jump the two terminals on the starter she fires right up . Took the starter out and bench tested and that is fine also tested the battery and that is good so I thought the ignition switch was bad because the key was loose and would hang up well new switch in and same thing . So Now I'm lost any help would be greatly appreciated .
 

Tazza

Moderator
Staff member
Joined
Dec 7, 2004
Messages
16,829
It could be the switch, but it could be a relay before the starter too.
 

Latest posts

Top