Reply to thread

Message: <blockquote data-quote="jdubya" data-source="post: 99800" data-attributes="member: 13791"><p>Good Morning, I changed the fuel filter on my 1980 model 1835c, 3-cylinder Case diesel engine uniloader and now it won't start. I bled each injector by running the starter until fuel came out each one of them. I filled the fuel filter with fuel before I installed it but a lot of fuel drained out of the bottom holes of the filter when it took 15-20 seconds to put the filter in place and install the hold down latch. Any idea how I can get it started. I did use a little starter fluid but it still wouldn't start. I put a new group 31P battery in it too. Thanks for any advice, Jdubya</p></blockquote><p></p>