Case uniloader 1835B

[Rors]

Hi Can any one help me i bout a case 1835b with one of the drive motors gone in it i replaced with a new drive motor. But my problem is that at the end of the drive motor shaft were it gos in to a housing were there is a Thrust washer Self Aligning Bushing and Bearing These parts on mine are all broken and are now obselet parts . The new parts are 13 Thrust washer 16A Bering Washer 16 Self Aligning Bushing 15 Needle Bearing Cage. But they all need the new part witch is number 14 Housing Witch cost a lot of money . case told me that they replace all the old parts with new versions be cos the drive motor shaft keeps on snapping and leaking. has anyone else had this problem with the old parts i have mentioned ? Thanks For any help Rors

 

[Hotrod1830]

Did you buy a new drive motor, or are you trying to rebuild yours? If you purchased a new one, it should already have updated parts. If you are trying to rebuild your's, then you will need all the parts the dealer say's you do,as the parts have been updated and will not interchange.
Search the internet for aftermarket suppliers of part's for drive pump's and motors, and give them a call. they may have the parts you need to rebuild yours correctly. Loaderpartssource.com offers a complete drive motor for your application. Give them a call and express your concerns/questions.
If your on a really limited budget, you may look into used/salvage parts. There are salvage machines around, you will just have to call around and ask.

 

[Rors]

Did you buy a new drive motor, or are you trying to rebuild yours? If you purchased a new one, it should already have updated parts. If you are trying to rebuild your's, then you will need all the parts the dealer say's you do,as the parts have been updated and will not interchange.
Search the internet for aftermarket suppliers of part's for drive pump's and motors, and give them a call. they may have the parts you need to rebuild yours correctly. Loaderpartssource.com offers a complete drive motor for your application. Give them a call and express your concerns/questions.
If your on a really limited budget, you may look into used/salvage parts. There are salvage machines around, you will just have to call around and ask.

Hi Hotrod1830 Its not part of the motor. Its what the end of the motor shaft go.s in to its the housing at the end you would see it if you stood looking at the side of the skid-steer with the two wheels off its a little housing between the two wheels the is a bering and bushing inside off there. They upgraded that pice thats what im after as the old one used to brake the end of the motor shafts and leek. Thanks Rors