Reply to thread

Message: <blockquote data-quote="therev" data-source="post: 84035" data-attributes="member: 7475"><p>I have a 2005 Case 410 skid steer that I replaced the engine and have been using it on the farm. It's been a great little machine but today as I was plowing snow the loader quit working. I can tilt the bucket either way and the skid steer will move but the loader will not raise or lower. There is a manual bypass cable in the cab that I can pull up and the loader will operate normally but if I stop pulling the cable the loader will not work. I used a pair of vise grips and clamped the cable in the up position and lowered the loader arms and parked in in the shop. Can someone tell me where I should start to find the problem? Wasn't sure if I have a valve problem or where to even start. Thanks</p></blockquote><p></p>