Reply to thread

Message: <blockquote data-quote="thetool" data-source="post: 17752" data-attributes="member: 1534">Lift the cab, in the center and in front of your pump, and aluminum tube about 4"x1.5", with tees and hoses on both ends.Remove the hoses, make sure you mark them somehow, and use caps and plugs.  The filter housing is clamped down with a strap clamp.  Remove it and open it with a 1 1/2" and 1 3/8" wrenches, and there is a bronze element inside.  Bobcat has a kit with new element and seals.  clean it and replace seals and element, re-install, and you in bidness.Your second filter is in the left rear, and is in-line with your auxillary case-drain, and is not so critical, unless you've been mega-planing or somethig like that.</blockquote>