Squish
Member
- Joined
- Dec 7, 2022
- Messages
- 5
So I'm revamping a skid steer, she's in relatively good shape, only 1000 hours....
The question is, on the left side of the cab, on the pillar opposite to the ignition side, there are quite a few empty switch caps. Removing the pillar cover revealed a ton of hanging connectors. I do have the service manual, but it's extensive, anyone know offhand what all those connectors would potentially run? It's pretty much impossible to just trace the wires without pulling the headliner and half of the interior
The question is, on the left side of the cab, on the pillar opposite to the ignition side, there are quite a few empty switch caps. Removing the pillar cover revealed a ton of hanging connectors. I do have the service manual, but it's extensive, anyone know offhand what all those connectors would potentially run? It's pretty much impossible to just trace the wires without pulling the headliner and half of the interior
