Reply to thread

Message: <blockquote data-quote="SomeoneSpecial88" data-source="post: 142665" data-attributes="member: 24015"><p>So I have a quick question I'm trying to get my valve cover off and originally I couldn't get it over the studs when I would tip it at an angle the studs stuck up too far or so I thought so I took the studs out using the jam nut method but I still can't clear the sloped piece of metal that is behind the seat, there is no way to get this valve cover off how did you get yours out? I've been trying to figure out what bolts I have to take out to get that piece loose so that I can gain maybe a quarter of an inch or something but I am struggling to get this out so if you have any advice I'd like to know since you have an 1835b with the diesel as well so it should be the same, thanks!</p></blockquote><p></p>