Reply to thread

Message: <blockquote data-quote="DJH" data-source="post: 56335" data-attributes="member: 7639"><p>Hello everyone, heres my problem. Been using my Case loader for over 5 years with no problems. Today I lost all ( almost) lift and tilt. I get just a little bit, enough to make the bucket twitch a little. This happened all of a sudden. Everything was going great then I went to dump a load of dirt and nothing. Im getting no hydraulic hiss like usual, and there is no auxiliary pressure, either. Drive and steering is all normal. I was told it may be sheared splines on the pump under the radiator, but I took it apart and all looks normal there. One thing I did notice when I had the seat out was the pump in there looks like its loosening from the engine, theres some back and forth wear at the top bolt. That probably explains the clacking sound when I kill the engine.....I will tighten that but dont think thats the problem with the tilt and lift functions. Any help would be appreciated, thanks in advance. Doug</p></blockquote><p></p>