Reply to thread

Message: <blockquote data-quote="aaa123" data-source="post: 37562" data-attributes="member: 2816"><p>Well, I figured out the problem... the nose of the motor is broken off, cracked right around through the cast iron. The machine went through hydraulic oil since I had it, but figured something was leaking under there but it was winter and couldn't work on it so I just kept it full. The pumps are dry and no obvious hose leaks, so here's where the oil was going. That motor was always half the speed of the other as well, so mystery solved. Was cracked and finally broke through. Don't know if that nose cone is still available or if I will have to spring for a whole motor. Yuk. -Hans</p></blockquote><p></p>