Reply to thread

Message: <blockquote data-quote="greenbuggy" data-source="post: 127810" data-attributes="member: 17524"><p>Hi guys, couple days ago I bought a Case 1816 Uniloader, serial no 9826415 from an estate sale.  Previous owner had repowered it to a twin cyl Kohler, according to his son it was running and driving less than a year ago but one of the pumps was leaking badly, he tore it apart before getting sick and passing away so I have one pump that is a complete assembly and one that is a box of parts, according to the book by serial no these would have been fitted with Vickers pumps and the part numbers on the physical pump is 232833, according to the uniloader operations manual these would have been Vickers TAG-50A-11-646 models but googling that part no brings up next to nothing.  Looking for recommendations for reseal kits for these pumps and curious if there's any good rebuilding vids or photos for problem areas to watch for during reassembly especially since I wasn't the one who disassembled it.  Have a parts manual from the Facebook 1816 group and have checked the Coleman equipment site, looks like most of the case part numbers are obsolete/discontinued for the seals and gaskets on this pump, thanks for any help you can give</p></blockquote><p></p>