Reply to thread

Message: <blockquote data-quote="michaaell" data-source="post: 48630" data-attributes="member: 6408"><p>Sorry about the late reply. I had to have an angiogram. The lift arm on the left side is where the fluid was pouring out. I lifted the bucket then set it up on top of sandbags so the bucket is about 4 feet off the ground. Then I removed the hydraulic lines and the top arm pin. The only thing now is the pin on the bottom will not come out. A friend of mine welding a threated bolt to the pin on the outside and then welding a plate with a nut on the other side of the bolt to pull it out but the 5/8 in bolt broke. Is there a way to pick up the cab so that I can pound the pin from the inside of the Bobcat or any other way that might work? Is the any way to attach a picture to a reply?</p></blockquote><p></p>