Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bushings on Bobtach plate
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="bobbie-g" data-source="post: 29801" data-attributes="member: 26"><p>OK, let me close out this thread. Found lots of irregularities with the bobtach plate: both upper edges bent and warped, one of them cracked and bent and hammered back into place then ground down; one lower pivot housing had the bad bushing, pulled the bushing, and the new bushing wallows around in the hole (the removed bushing was out of round and not square, obviously a cobbled-up fix). I could have had a machinist work it over, but I instead chose to get a new one for $1100 from Bobcat. I'll install it next week. ------ Many thanks to all who responded with advice. <img src="data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7" class="smilie smilie--sprite smilie--sprite1" alt=":)" title="Smile :)" loading="lazy" data-shortname=":)" /> ---RC</p></blockquote><p></p>
[QUOTE="bobbie-g, post: 29801, member: 26"] OK, let me close out this thread. Found lots of irregularities with the bobtach plate: both upper edges bent and warped, one of them cracked and bent and hammered back into place then ground down; one lower pivot housing had the bad bushing, pulled the bushing, and the new bushing wallows around in the hole (the removed bushing was out of round and not square, obviously a cobbled-up fix). I could have had a machinist work it over, but I instead chose to get a new one for $1100 from Bobcat. I'll install it next week. ------ Many thanks to all who responded with advice. :-) ---RC [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Bushings on Bobtach plate
Top