Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Building a 3-point adapter and PTO for Bobcats
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="jerry" data-source="post: 78268" data-attributes="member: 931"><p>I don't see where the problem is. I would not install the flow control you are going to because I cant forsee any reason for a relief at that point. Just run your hose to the motor and put a loop back from in output line on the motor to the input port with a one way check valve in it. If you are using something on this adapter that is not motor driven and you need to control flow then you put a simple adjustable flow fitting inline. If you have the control already that you mention then install it and run the relief line back to the reservoir or plumb it into the return line on the adaptor but remember sometimes you will be reversing the flow when operating a cylinder.</p></blockquote><p></p>
[QUOTE="jerry, post: 78268, member: 931"] I don't see where the problem is. I would not install the flow control you are going to because I cant forsee any reason for a relief at that point. Just run your hose to the motor and put a loop back from in output line on the motor to the input port with a one way check valve in it. If you are using something on this adapter that is not motor driven and you need to control flow then you put a simple adjustable flow fitting inline. If you have the control already that you mention then install it and run the relief line back to the reservoir or plumb it into the return line on the adaptor but remember sometimes you will be reversing the flow when operating a cylinder. [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
Building a 3-point adapter and PTO for Bobcats
Top