Reply to thread

Message: <blockquote data-quote="tmq" data-source="post: 40137" data-attributes="member: 4715"><p>Sounds like you're trying to get the bobtach quick release pins to raise up from the bottom. I just went through a similar situation, the levers were both broken and pins were stuck. It took me an entire evening to free up the pins with tapping and plenty of PB blaster but finally go them moving a little at a time at first and then all the way out. They will only come out up from the bottom. I tipped the bobtach all the way down to get easier access to work. Have fabricated a couple new handles and they work great now.</p></blockquote><p></p>