Brushcat 60 and a 743?

[cmb7684]

So I have what I think is a good deal on a brushcat 60 (it is a 2007 model that has been used 3 times and he wants 1500.00 I'm not sure my 743's pump is large enough capacity to push it. If it is not large enough would it operate at reduced power and still work or would it not operate at all?

 

[skidsteer.ca]

It will work, it will just tun slower because you pump has a lower volume then the loader it was built for. So you will have to drive slower and be more patient with it. The more important question is why does he only want $1500 for it. Its worth twice that.
Ken

 

[cmb7684]

It will work, it will just tun slower because you pump has a lower volume then the loader it was built for. So you will have to drive slower and be more patient with it. The more important question is why does he only want $1500 for it. Its worth twice that.
Ken

Thanks for the reply. This is legit. I saw it yesterday. It is a non profit corp that no longer provides the bobcat services because the operators they had left town and they operate on volunteer workers. They were offered 1500.00 by the dealer but have no way to bring it there or unhook it from the machine as they did not even know how to start it when i went there and have no one who can do it. I scored a heavy duty 72" dual grapple construction bucket made by bobcat for 600.00 I was hoping it was the 60" bucket but I assume I my get used to the 72" shouldntbe that much if a difference. Loading the 60" in the back of my truck seemed so much easier Anyway thanks again for the reply.