Reply to thread

Message: <blockquote data-quote="Tazza" data-source="post: 9837" data-attributes="member: 82"><p>Flat washers will also work no problems at all. The machine i'm currently working on had them and they went back in. The main reason i used nylon was because its easy to machine and you can easily cut them to be a nice snug fit. With washers you need to get a range of thick and thin unless you make them your self. which ever way you go, it will be the rite choice. The less movement from side to side the less dirt can enter the pivot points.</p></blockquote><p></p>