Reply to thread

Message: <blockquote data-quote="mredden" data-source="post: 48652" data-attributes="member: 6515"><p>I recentley bought a bobcat 853 vin#512818429.I attached the grapple hooked my lines up started the engine push the auxiliary lock button and moved the right joystick buttons back and forth but the hydraulics for the grapple wont do anything.Everything else works fine.Up down tilt.The green lights will come on when you push the lock buttons and they will go out when you turn them out.Like i say the grapple wont move at all not so much as a sound.I have checked fuses,harness, plugs,looked for bare wires.I have the BC853 manual with the wiring diagram and i pulled the auxiliary control module from under the seat attached to the left side of the bobcat frame.When i unplugged the module box the plug contacts and the module box itself looked like it had been dipped in a bucket hydraulic fluid.I might be wrong and if i am please let me know but im thinkin its that module but how can i be sure?Is there a way to test that control module?Cause there is no tellin how much that thing will cost if it can even be goten.Thanks so much for any help you guys can offer....</p></blockquote><p></p>