Reply to thread

Message: <blockquote data-quote="smiley.keith" data-source="post: 142836" data-attributes="member: 27619"><p>Agree the elbow is SAE and tapered on the end where hydraulic hose attaches. The other end of the elbow is 3/4" pipe thread. I attached a 3/4 nut inside the large filler hose with o rings outside and inside. Even if there is leaking between the pipe thread and nut it's inside the filler tube so shouldn't leak externally. Like I mentioned I can replace the large filler hose if this doesn't work but if I drill directly into the tank and it leaks there I'm stuck with the problem.</p></blockquote><p></p>