Reply to thread

Message: <blockquote data-quote="Bobcatdan" data-source="post: 87310" data-attributes="member: 7339"><p>The 7 pin harness plugs into the main harness by the battery then runs up the boom arm to be booked on the aux coupler block. If you notice, there are two holes in the top of the block, that's where the harness mounts to. The kit is about $200. The machine is 100% ready for the cable, its just not installed if the person has no use for it. As for what size, get what ever size you can find and are happy with.</p></blockquote><p></p>