Bobcat seal/wear ring kit

Help Support SkidSteer Forum:

Petetown

Member
Joined
Oct 5, 2019
Messages
12
These seem like a pretty good kit anyways need a little info it says to drive the ring all the was in now my question is do you drive the sea right up to the back of the ring?
 

flyerdan

Well-known member
Joined
Mar 7, 2009
Messages
983
The seal should bottom out in it's pocket right over the scored area of the shaft, which should be adequately covered by the speedi-sleeve.
Be sure and fill the area between the seal lips with grease; it will greatly reduce the chance of damage while installing and provide lube that will extend its life considerably.
 
OP
OP
P

Petetown

Member
Joined
Oct 5, 2019
Messages
12
The seal should bottom out in it's pocket right over the scored area of the shaft, which should be adequately covered by the speedi-sleeve.
Be sure and fill the area between the seal lips with grease; it will greatly reduce the chance of damage while installing and provide lube that will extend its life considerably.
Ya after taking a closer look I realized the seal question was quite obvious haha and yup greased them up good ! Also wondering what guys are using to seal up the hatches on the chain case Rtv fine?
 
Top