Bobcat SB 200 Trouble

[farmin]

I have a 72" SB200 purchased in 2015, low flow attached to a S590 low flow, also 2015. These were both purchased new from a local Bobcat dealer. Problem, A red squirrel eat the wires connected to a set of solenoid valve coils (stack). I replaced both coils with OEM parts. When I start the blower up the auger turns as it should. When I engage the chute rotation the auger shuts off. When I engage the chute deflection nothing happens, auger still turning. I disconnected the wires going to all four coils, and the same thing happens. The harness looks good, pins are clean, seven pin. Any advise ? Thanks Henry