Reply to thread

Message: <blockquote data-quote="alchemysa" data-source="post: 105734" data-attributes="member: 13436">As for your original questions, yes the oil flows from side to side. Theres a box shaped channel connecting the two sides. (Its located under the hydraulic valve unit.)Last time I looked, oil seal kits were available on ebay. Just type in '610 lift or tilt cylinder kit'.Poor movement on one side could be a few things. First thing to check is clutch adjustment. Easily done by removing the 2 caps on each side and following the instructions in the book. If that doesnt fix it, and your oil level is OK, you will need to remove the large side covers and look deeper.</blockquote>