Reply to thread

Message: <blockquote data-quote="Phil314" data-source="post: 122134" data-attributes="member: 11667">If you've got the deluxe keyless display, you can go through the pages on the right display screen and one of the pages will list all the trouble codes.If you've got a key ignition, then the left display should show a diamond with exclamation point symbol and show the trouble code.You may have to push and hold the head light button for 2 seconds when the alarm sounds when you turn the machine on.Since you say everything else works, I'm guessing you won't have any trouble codes.Sounds more like your problem is still with the 7 pin harness or the v plow.You sure the vplow is working? Any other attachments you could try.I'd probably also try to get the pinout from bobcat and try to check that your getting some kind of 12v or signal at the connector.Any chance it's the wrong harness for your machine? But I would think they are fairly standard on the M series.</blockquote>