Bobcat 873 help

[tractor_man2012]

Picked up a bobcat 873. Ran fine. Got it home now it just turns over for a sec and then stops.
Code 14-03 pops up

 

[polishpete]

FUEL SWITCH

 

[polishpete]

CHECK YOUR FUSES
OR IF U DO IT MANUALLY WILL RUN

 

[tractor_man2012]

CHECK YOUR FUSES
OR IF U DO IT MANUALLY WILL RUN

I tried that

 

[polishpete]

DID U OPEN IT UP MANUALLLY or see when u turn the key see it it ioensd

 

[polishpete]

u saying it turns over like short two times and stops thats your soleniod for injectors

 

[tractor_man2012]

When I turn the key to start the machine it spins over for 1 or 2 seconds and stop (!) Light comes on. Then I tried to jump the solenoid on the start just spins over. And I tried manually with the fuel shut off

 

[tractor_man2012]

I'm guessing I have major main board problems. B4 this start the (HAC) light would come on

 

[polishpete]

NOPE

 

[polishpete]

THE BLACK RELAY FOR FUEL IS NO GOOD OR ITS NOT HAVING GOOD CONTACT TRY
TO BY PASS IT WITH A JUMPER TURNS OVER FOR 2 TIMES THATS IT RIGHT U JUMP THE STARTER
SPINS NO START RIGHT

 

[tractor_man2012]

THE BLACK RELAY FOR FUEL IS NO GOOD OR ITS NOT HAVING GOOD CONTACT TRY
TO BY PASS IT WITH A JUMPER TURNS OVER FOR 2 TIMES THATS IT RIGHT U JUMP THE STARTER
SPINS NO START RIGHT

Yes. I've swapped relays. I'll dig it to the wiring and see if there's a broken wire or something on the back side

 

[polishpete]

IT HAS TO DO WITH FUEL SOLENID BAD CONTACT

 

[polishpete]

RIGHT OR JUMP THE RELAY

 

[tractor_man2012]

RIGHT OR JUMP THE RELAY

I have it working now. I'm having issues with the hand controls AHC light comes on with code 32-35

 

[polishpete]

WHAT DID U DO

 

[polishpete]

u have to swap athe connections on the actuars see if the problem moves to the other one

 

[tractor_man2012]

u have to swap athe connections on the actuars see if the problem moves to the other one

got it, is been working since i replace all the relays. now im trying to figure out the 2 speed. any ideas on that? i flip the switch doesnt seem to do anything

 

[polishpete]

CHECK YOUR FUSE

 

[polishpete]

have to check the solenoild dont know to much on that

 

[873skid]

I have a 873 with 2 speed switch but it didn't come with the 2 speed You might check that it came with the 2 speed.