Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
General Skidsteer & Technical Topics
Shop Talk
Bobcat 873, Duetz BF4M 1011f
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="bttpe" data-source="post: 113807" data-attributes="member: 19457"><p>I rebuilt the engine in my 873 and reused the injectors. Two of the injection pumps were seized (the pin would not move freely) so I replaced them with two "other" injection pumps. The depth of the pump assemblies measure different. Now to the problem. The fuel control rack moves freely in and out which I checked with the fuel shut off solenoid out. I can easily start. However I cannot shut off without manually shutting off fuel (installed a ball valve). I measured all the of the depths for the injection pumps and reused the shims based on the measurements. I don't understand if I have an injector problem or a pump problem. It would seem to me that the fuel rack would shut off each pump and that there shouldn't be any reason for fuel to continue to flow if the rack is shut (pressed IN which would rotate the injection pump pins Clockwise to shut off). Anyone have experience with this?</p></blockquote><p></p>
[QUOTE="bttpe, post: 113807, member: 19457"] I rebuilt the engine in my 873 and reused the injectors. Two of the injection pumps were seized (the pin would not move freely) so I replaced them with two "other" injection pumps. The depth of the pump assemblies measure different. Now to the problem. The fuel control rack moves freely in and out which I checked with the fuel shut off solenoid out. I can easily start. However I cannot shut off without manually shutting off fuel (installed a ball valve). I measured all the of the depths for the injection pumps and reused the shims based on the measurements. I don't understand if I have an injector problem or a pump problem. It would seem to me that the fuel rack would shut off each pump and that there shouldn't be any reason for fuel to continue to flow if the rack is shut (pressed IN which would rotate the injection pump pins Clockwise to shut off). Anyone have experience with this? [/QUOTE]
Verification
Post reply
Forums
General Skidsteer & Technical Topics
Shop Talk
Bobcat 873, Duetz BF4M 1011f
Top