I started my bobcat today and pressed the green operate button, as soon as I tried to lift the boom it beeped and the orange lift/tilt light goes out. I have had similar problems in the past where it would stop lift/tilt function while operating but now it won't even lift enough to move the machine. I learned that a corroded fuse was the problem when had this issue before but now I am stumped, the fuse conection is clean, what could be causing this?
Bobcat 873 AHC problem
- Thread starter EL1984
- Start date
Ok, I checked it today, no error code. I started the machine and pressed the green operate button and all lights came on except the lift/tilt. I lifted the bar to reset it and pressed the button again several times, finally it lit up but as soon as I touched the controls it went out and the panel said "AHC TILT HANDLE NOT CALIBRATED". What to do next?Is there an error code?---Bobbie G.
