Reply to thread

Message: <blockquote data-quote="skidsteer.ca" data-source="post: 28931" data-attributes="member: 307">I know the 909 and 709 hoes are not the same, believe the pin diameter is but not the location. Measure the pins you have and then take a piece of cardboard and cut the outline of the bucket and the pin locations into the cardboard. tke your "template" with you when looking for bucket candidates. I still have the 16" from my 909, I was going to adapt it to the 709 which has a 20", but have not got to it yet. I had the 12" for the 909, but it never help trenching speed unless I was in sand or gravel, as it required being cleaned out too often.Ken</blockquote>