Bobcat 864 changed oil and filters start low oil pressure and shut down

Help Support SkidSteer Forum:

Crs

New member
Joined
Aug 12, 2022
Messages
3
Hello hope someone can help. I recently serviced my 864(oil-filter/ fuel filter/hydro filter/fuel tank pickup line and screen) started it up and right away low oil pressure came across the screen and shut down. I restarted it and ran really rough no alert but shut down. I drained 2.5 gallons of oil out put 2.5 gallons in it. Any info would help.
 

brdgbldr

Well-known member
Joined
Jun 1, 2012
Messages
1,165
Are you sure it was the engine oil low pressure and not the hydraulic oil low pressure?
 

mrbb

Well-known member
Joined
Jul 19, 2016
Messages
494
did you fill oil filter before installing it
if not, maybe when it was empty at start up it tripped an alarm on low oil pressure?/
then once it primed the system after running, all is OK now?/ not saying this is 100%, but could be a possible reason why it threw an alert!
 

oiu789

Well-known member
Joined
Dec 23, 2017
Messages
138
Sounds like air in the fuel system. Make sure it is primed. Restart it a couple of times to see if clears up.
 

Latest posts

Top