Reply to thread

Message: <blockquote data-quote="krabill" data-source="post: 132354" data-attributes="member: 23026">Got my engine out yesterday and found the cause of the leak.  the drive pumps only have the two bolts holding them together, well the bolt on the backside (next to engine) is broken off, I can see what is left of a stud.  Not only that bolt is broken but the mounting bolt for the entire pump on the left side of the machine is also broken off!  Next is pulling the pump pully off of the shaft so I can take the pump to a workbench, I tried with a 3 jaw puller and a bit of heat with no joy.  I just ordered the correct two bolt puller and will try again this week, that pulley is stuck on the shaft good!</blockquote>