Reply to thread

Message: <blockquote data-quote="River Fluid Power" data-source="post: 131749" data-attributes="member: 21921"><p>That pump only has three bolts holding it together. 2 twelve points and a nut on a stud. There are 4 or 5 o-rings between the two halves. The charge pump is also in between the two halves. You must make sure the charge pump cover locating pin goes back into the hole it is in when you take it apart. Moving the pin will change the operating rotation of the charge pump. If it is incorrect you will have no charge pressure. Good luck!</p></blockquote><p></p>