bobcat 853 do i have a pump with split hydro-static porting

[turgeons tree service]

Hello, my name is travis turgeon. im new to this form but in the last week it has saved my A** so many times. im very thankful to have found it. Im currently finishing up fixing a leak between my left and right half of my hydro-static pump. now im re-assembling everything and want to make sure my pump is being set up for the correct rotation. https://www.manualslib.com/manual/824792/Bobcat-853.html?page=175#manual basically i should of paid more attention on how it came apart. and now I'm second guessing my self on if the pin goes in the top or bottom hole. Thanks for the help in advanced. hopefully i explained my self well enough

 

[Tazza]

Good to hear you have found the site useful with getting out of trouble.
If it's already back together and installed, you can really only give it a go and hope it's right, you have a 50/50 chance it's right.
Without seeing it, i don't fully understand what they are talking about two ports facing forward, two backwards.
Do let us know how you go.

 

[turgeons tree service]

Good to hear you have found the site useful with getting out of trouble.
If it's already back together and installed, you can really only give it a go and hope it's right, you have a 50/50 chance it's right.
Without seeing it, i don't fully understand what they are talking about two ports facing forward, two backwards.
Do let us know how you go.

nothing is put together. its one hell of a afternoon to remove i really hope i get it right. but my pump looks 100% just like the article i attached. i can provide pictures if needed. thank you it is nice to know i can't damage the pump either way.