Reply to thread

Message: <blockquote data-quote="Fishfiles" data-source="post: 11047" data-attributes="member: 782"><p>For the clunking I think I would jack all four wheels off the ground and check the bearings on all the wheels , also at the same time you can rotate the wheels forward and reverse by hand and you may be able to locate the clunking ----------I have never seen where a bad hydrulic pump will let the boom and tilt leak down , the pressure is past the pump and held by the valve , if there is no external oil leaking then it has to be in the valve since both funtions are affected , I ave seen this before and seem I remember it being a little valve ( which I think is called an anti cavatation valve ) on the controll valve</p></blockquote><p></p>