Bobcat 773G sensor issue

[CFarms]

Good day!
2000 Bobcat 773G with safety bar issues. Acts like a bad switch. Immediately the hydraulic and engine oil pressure lights came on and went into shutdown mode. Sensors are showing 2.5 volts and I am not finding any damaged wires anywhere. Any one familiar with this issue?
Thanks!

 

[fortworth-cowboy]

Good day!
2000 Bobcat 773G with safety bar issues. Acts like a bad switch. Immediately the hydraulic and engine oil pressure lights came on and went into shutdown mode. Sensors are showing 2.5 volts and I am not finding any damaged wires anywhere. Any one familiar with this issue?
Thanks!

Well the safety bar and the hydraulic/ engine oil pressure switches have nothing to do with each other.
Explain step by step what is happening.

 

[CFarms]

the safety bar light is in and out. Brake would randomly activate. Tested bar switch and only getting 2.5 volts at plug. Shortly after the safety bar acting up, the hydraulic and engine oil pressure lights came on and went into shutdown mode. They are not related and the machine ran fine prior to this.
Wondering if it is the computer ECU going bad. Checked all wires, checked battery connections and ground. Can’t find anything