Visit our tractor and agricultural equipment communities:

Ingersoll Forum Case IH Forum Combine Forum Hay Forum

JCB Forum John Deere Forum Kubota Forum Mahindra Forum

Massey Ferguson Talk New Holland Forum Valtra Forum Yanmar Forum

Zetor Forum Farming Forum

Reply to thread

Help Support SkidSteer Forum:

Message: <blockquote data-quote="Schifference" data-source="post: 126141" data-attributes="member: 19406">So I got the lift and tilt to work as designed. What did I do? I removed both hydraulic spools, I checked to see that spring and mechanism was working. They are sucked in and will pull outward. I replaced them in the opposite location that I took them out. I started the machine and the Boom and tilt worked as designed. No need for Aux Hydraulics to operate boom or lift. Then I turned Aux Hydraulics on again and boom and tilt stopped working again. Except, this time, Aux hydraulics and trigger and toggle left nor right would render boom and or tilt operational. The emergency relief being turned and pulled up would. So then I once again took the spools out and changed location back where they were initially. I started the machine and boom and tilt function as designed. I have not turned on Aux Hydraulics again. Seems like something with the spools or??? is causing other hydraulics to not function properly and as mentioned a few years ago Aux Hydraulics only worked one way.If you wouldn't mind continuing the brainstorming, I would appreciate it. I would rather fix it myself if possible. I sincerely appreciate your input.[MEDIA=youtube]80L8uoiZL-A[/MEDIA]Gosh you seem to know the Bobcat parts. I am not objectionable to purchasing spools if they are not too costly. If you think that could be it, would you be willing to point me as to where to look for a spools for 773G?Thanks again.</blockquote>

Verification