I have bobcat 773. Its starts fine but then I push the interlock button it does not light up and the bucket or tires will only moves inches then lock up. The BCIS panel show power and that the bar is down, but the valve light, traction, and system activated light are not lite. Tested the BICS 10 amp fuse and it is ok. Battery voltage is 12.2 Don't know where to go from here. Questioning if it's the seat switch, or the bics relay ( which I have no idea where it is at ) Any suggestion would be greatly appreciated
Bobcat 773 interlock problem
- Thread starter gleagroup
- Start date
walio123
Well-known member
- Joined
- Dec 9, 2013
- Messages
- 367
Sensor under the seat and seat bar sensor are the same. Make extension by three cable, dissconect connector out of the sensor under the seat Put three cable hooked on it and then hang them on the seat bar sensor. Lower the seat bar -if seat light on BICS panel come on- its a faulty sensor. Also check seat sensor circuit for continuity.
