Bobcat 763

[shadesofidaho]

The magnetic seat switch is freezing up.Can it be disabled and how?Three yellow wires comming to it then green,red, and black.It seemsto stop all hydraulics I have cleaned it several time but sets awhile and seems toget moisture and freezes. Thanks Joe

 

[BobCat]

Replace it. That's the best solution. Later BobCat.

 

[shadesofidaho]

Replace it. That's the best solution. Later BobCat.

I have replaced it it is winter here in Idaho.It worked fine in warmer weather.Thanks Joe

 

[skidsteer.ca]

I have replaced it it is winter here in Idaho.It worked fine in warmer weather.Thanks Joe

Take it apart and glue the moving part that is held by the seat track bolt to the part that bolts under the seat. You will have to position it so the green 'seat light” is on on the bics module rh side beside the seat.
Or else you can by a $200 kit to remove it and put a push to operate button in the cab
Ken

 

[nobull1]

I have replaced it it is winter here in Idaho.It worked fine in warmer weather.Thanks Joe

I had the same problem with mine. I just took the whole thing apart from the bottom of the seat. Once I had it apart I just put it together so the light was always on, then secured it in that position and tied it up under the cab.....problem fixed.

Brian