Reply to thread

Message: <blockquote data-quote="dirtyb115" data-source="post: 52372" data-attributes="member: 1004"><p>Hi all.. Might be going to look at a 2000 Bobcat 763, that supposedly has 1100 hours, no leaks, engine runs good etc.. Only problem is he says it needs new bearings and one axle tube needs replaced/repaired. (Looks like he has run metal tracks on it.) At any rate, i assume you have to cut and weld on a new axle tube end? If this is true, can these be purchased somewhere? Has anyone done this repair and how tough is it? Thanks! Dave</p></blockquote><p></p>